Thing-O-Matic Fundraising
Anybody who help fund the purchase of a thing-o-matic will get a share of 50% in the profit-sharing scheme based on how much they funded. People can call for an assembly and vote on business decisions. Otherwise, I will be responsible for the day-to-day business decisions and such. Note this is only tentative.
http://store.makerbot.com/makerbot-thing-o-matic.html
The business proposal: A thing-o-matic hooked up to a bitcoin based interface. Basically, I will be the first business to manufacture items on a mass production scale for bitcoins.
Why trust me?
- I been an escrow for the EFF and now the CCC and help organized the letter writing campaign to the EFF and the CCC.
- A highly active and interested poster in this forum.
- A 500 dollars bet/stake into the success of the bitcoin economy.
PENDING TRUST(Not fulfilled yet)
- Run a web app that accept bitcoin.
- Run bitpredict.
The fundraising effort will target 612.5 dollars worth of bitcoins. You invest at your own risk.
All bitcoins will go to this address:
[redacted for the time being]
Also notes, I will need to exchange bitcoins for dollars. That will take time.
Anybody who help fund the purchase of a thing-o-matic will get a share of 50% in the profit-sharing scheme based on how much they funded. I assume all business decisions.
You’re going a bit fast, imo.
What about writing a clear and exhaustive company status document ?
If you want to raise say 2000$, you must sell say 100 at 20$ each. I.e about 200 BTC / share.
I’d be ok to buy one share, but you have to formalize all this much better.
Alright. It would be helpful if a lawyer can give his opinion on it, too.
Alright. It would be helpful if a lawyer can give his opinion on it, too.
We don’t need a lawyer, but a few precautions.
First, you should publish your GnuPG key. Your reputation worths nothing if it is not associated to a secure way to identify yourself.
Second, if I send some bitcoins to your address, you have to send me a signed document proving that I actually contributed to your fundraising.
Also, you have to publish somewhere about how much exactly has been raised so far. Such publicaction should be as regular as possible.
Moreover, if I buy shares of your microcompany, I expect a bit more than a right to receive a share of your future profits. There should be the possibility to attend to an assembly and to vote for decisions. You can’t claim “all business decisions” once you’re not the only one who brought the capital.
Suggestions noted. I’ll change so that people can call assembly and vote for decisions, but it will be noted that the document is not finalized yet.
I am also unfamiliar with signing document with my key and such…so there will be some time.
Also, I will be responsible for most the daily decisions making.
Anybody who help fund the purchase of a thing-o-matic will get a share of 50% in the profit-sharing scheme based on how much they funded. People can call for an assembly and vote on business decisions. Otherwise, I will be responsible for the day-to-day business decisions and such. Note this is only tentative.
http://store.makerbot.com/makerbot-thing-o-matic.htmlThe business proposal: A thing-o-matic hooked up to a bitcoin based interface. Basically, I will be the first business to manufacture items on a mass production scale for bitcoins.
Could you explain a bit better what the business idea is? Sorry but I am not the expert in thing-o-matic stuff.
What will it produce? How should things be sold? etc
Thing-o-matic is a 3D printer. Basically, it will produce a 3D object out of ABS plastic. People will be charged primary on the size of the object and than how many objects that will be produced.
The bigger the order the bigger the cost but they will also benefit from bulk discount.
Thing-o-matic is a 3D printer. Basically, it will produce a 3D object out of ABS plastic. People will be charged primary on the size of the object and than how many objects that will be produced.
The bigger the order the bigger the cost but they will also benefit from bulk discount.
I’d like to add that such a service is not new (I think it’s called “rapid prototyping”), but this one would be the first one to charge in bitcoins.
It is not just “rapid prototyping” but “mass produciton rapid prototyping”.
I might be interested.
If you are going to need dollars then I think you need to make the offer as x% of profits for $y.
Of course you can accept payment in btc at whatever rate you expect to be able to get. Well, actually at a worse rate for exchange rate risk because you have to get $1225 at least.
Investment are entirely in bitcoin, and profit sharing are entirely in bitcoin.
FFreeMoneyAlso, you are presumably going to be adding labor for a long time, but we will get a permanent share of unlimited profit? Perhaps it makes sense to cap investors return at 5-10 times initial investment? This helps us get your incentives right too, if you put a lot of god effort in then you can get to the point of keeping all your labor.
The labor is in assembling in the kit, the coding of the website, customer support, and then the delivery of boxes. However, I expect the operation to mostly scale.
Then, there’s also the maintenance and upgrade cost for the bots too. My reputation is also at risk. Not just if I screwed you guys out but if I make money for you guys too.
Keep in mind, I get 50% of the profit. You guys get maybe only 1% of the 50% leftover and you get to stay anonymous.
FFreeMoneyA rough timeline would be nice too. For example, if you only have $400 in a month are you going to keep trying or return investments?
That’s a good question. I don’t know what to decide yet.
FFreeMoneyAnd what about ongoing costs? What is the price of the plastic? Is electricity an issue?
A pound of plastic is included with the kit. But to buy more plastic, it cost 15 bucks for a pound of plastic, 65 dollars for 5 pound of plastic. I assume electricity isn’t a problem.
Keep in mind, I get 50% of the profit. You guys get maybe only 1% of the 50% leftover and you get to stay anonymous.
This is just not acceptable. You should receive in porportion to the part of the capital that you own.
If your machine costs 12500$, you’ll get 50% of the profit if and only if you bring 625$.
If you get 1 share out of 100, you get only 1%.
If you get 1 share out of 100, you get only 1%.
Indeed. But that’s not possible if you already get 50% without owning 50% of the shares.
I am sorry? You mean I have to purchase it myself? I am the guy who will put in the code and the labor and direct the operation.
I am sorry? You mean I have to purchase it myself? I am the guy who will put in the code and the labor and direct the operation.
That is not how things work. What you are talking about is a labour. It requires a salary. This can be negociated. A director can perfectly be a simple employee. Same for any technician.
But this is different from the way profits are distributed.
Than you’ll have to wait until I make enough money from other business venture before I’ll consider raising capitals for thing-o-matic. This is as far as I goes.
Than you’ll have to wait until I make enough money from other business venture before I’ll consider raising capitals for thing-o-matic.
I understand. It’s perfectly normal from you to want to make money with your idea, without giving half of it to investors.
To do so, you need to raise half of the price of the device.
But you can also accept the idea that investors will gain more money than you, at least at the beginning. Then, with the money you’ll earn, you will buy their shares back, until you eventually own more than 50% of the company.
I lowered the fundraising target to 612.5. Until I can front the other half, it will remain no go.
Capitalism is free people making whatever agreement they want about capital and funding. If some people want to pay for his labor with half the profits from their capital, then so what?
grondilu felt this is an especially unfair arrangement. I want his money but I also want an amicable relationship with my shareholders.
I lowered the fundraising target to 612.5. Until I can front the other half, it will remain no go.
Ok, but investors will be more interested in bringing the second half if you can show them that you already own the first.
To put it simply, your project exists already : right now you own 100% of the shares. But those shares worth nothing, until you convince people to buy some.
If you convince investors that you own 625$, and tell them that you intend to buy a 1250$ worh machine, then you might convince them to buy 50% of your shares at 12.5$ a share.
Your company will then have the necessary amount, and you will have a the right to keep 50% of the profits.
It will be hard to prove that I have 625 bucks, especially when I don’t like showing my paypal account to outsiders.
In the mean time, I’ll guess I’ll prepare a “prospectus” about the business idea. It will also include details of how to do assembly and voting, all the possible costs, business model and much more.
It’ll be available for viewing and feedback.
Well, this is all quite true. But to me it is not clear that Kiba was aware that he was selling 50% of his company, and not 100%.
Kiba oviously can’t sell his reputation at a huge price as Google did. The only thing he could sell beyond the price of the machine, is his idea and his motivation to make it real. And it is not particularly original. Thus to me, his company worhs very few more than the price of the machine.
It is nice anyway to see such a young person (I think he said he’s a teen) interested in venture capitalism. I might indeed be interested. But he has to come up with a proper initial offering.
I am a college student, not a teen. 😉
indeed - now that we’re all on the same page, the bargaining can commence. 😊
Commence what?
indeed - now that we’re all on the same page, the bargaining can commence. 😊
Also, I’m not very keen on buying a share of a company, knowing that the initial founder will own 50% of it.
Because this gives him a bit too much power, imo.
Say, for instance, that too a small amount is raised, and that the machine cannot be bought.
If there is too small amount is raised, I’ll simply buy the rest of the shares and own majority of the company and the business will start much later.
After all, my previous ventures will be bootstrapping this venture and the profit will continue to pour in until I purchase all the unbrought shares.
If there is too small amount is raised, I’ll simply buy the rest of the shares and own majority of the company and the business will start much later.
If what you’re suggesting is the only solution, then you are the only buyer. In that case, you can buy these shares at almost zero, since those shares don’t worth anything unless you buy them. This puts you in a huge dominant position (many sellers, only one buyer).
It doesn’t accomplish the purpose of raising enough money to buy the machinery.
Guys, it’s only a small business, don’t try to make it so complicated that it can never get started.
Kiba, just set out clearly how the business is going to work, then people can decide whether or not to invest. Some kind of plan like this:
- I “sell” 50 shares in the profits of the business. Each share is BTC 300 and entitles the purchaser to 1% of the profits.
- If I don’t sell 50 shares within 90 days, I return everyone’s BTC and the project ends.
- If I sell 50 shares within 90 days, I stop selling shares.
- I use the BTC to buy the Thing-o-matic and other expenses needed to start production, plus the initial stock of raw materials.
- I set up a website so that people can upload their shape-files and pay with BTC to receive the produced “things”.
- The shareholders and I will have a weekly meeting, but I will make the final decisions about how the business is run.
- If the shareholders don’t think the business is working out satisfactorily, they can vote to close it down.
- If I don’t think the business is working out satisfactorily, I can close it down.
- If the business is closed, all of the equipment will be sold and the funds distributed to the shareholders according to their shareholding.
Looks fine. I’m interested in buying, now.
I’ll take that as a first draft.
For me to invest, I’d look for one more thing. I’d want the website to be substantially complete before investing to buy the machine.
Fair enough.