0.3 almost ready -- please test the Mac version!

I finished everything on my list to do for version 0.3. The code on SVN is about ready to release.

Testing at this point is much appreciated.

I finished everything on my list to do for version 0.3. The code on SVN is about ready to release.

Testing at this point is much appreciated.

I finished everything on my list to do for version 0.3.  The code on SVN is about ready to release.

Testing at this point is much appreciated.

I’m just here 😄

Windows 7 x64 4 GB RAM Intel i7 860

Very nice! There have definitely been some major improvements, including the hashmeter, RPC support, and a command-line daemon. It would be nice if the listtransactions RPC method were finished before the next release, though. Also, some code should be added to the JSON-RPC methods to list out dHashesPerSec.

Great work Satoshi!

Whoohoo! Can’t wait!

Note, is there somewhere I can get a devel build? Maybe we can setup nightly builds or something…

Should we try for some publicity? Slashdot is good if we can get it.

I’ve had a number of submissions accepted, though always by one editor that no longer works there. Anyone else with a Slashdot connection?

It would be nice if the listtransactions RPC method were finished before the next release, though.

My fear is too many programmers would latch onto that for checking for received payments.  It can never be reliable that way.  The list/getreceivedbyaddress/label functions are the only way to do it reliably.

We shouldn’t delay forever until every possible feature is done.  There’s always going to be one more thing to do.

Here’s RC1 for windows for testing:
(removed, see RC2 below)

Please only download this if you’re going to test and report back whether everything seems fine or not.  Make sure to look through the files in “c:\program files\bitcoin”

I finished everything on my list to do for version 0.3. The code on SVN is about ready to release. Testing at this point is much appreciated.

I just finished creating a clean Amazon EC2 debian 5.0 machine image with everything I needed to compile bitcoind, and it compiled (using a variation of Laszlo’s makefile.unix) and is running fine (just finished downloading the block chain). I’ll let you know if it misbehaves.

I had trouble compiling the gtk version, but I think that’s because I did something wrong compiling wxWidgets. I don’t need no stinkin’ graphics (and am not a wxWidgets expert), so I’m not going to bother trying to fix that.

I have the same problem :|

[Deleted] Quote from: davidonpda on June 22, 2010, 06:23:26 PM

EXCEPTION: 22DbRunRecoveryException

DBENv::open: DB_RUNRECOVERY: Fatal error, run database recovery C:\Program Files\Bitcoin\bitcoin.exe in OnInit() What operating system?

Normally when it does that it’s because the directory where the data directory should go doesn’t exist.  See if the “%appdata%” directory exists.

Do you get that error with 0.2 also?  It’s hard to see how you could get that with 0.3 and not with 0.2 since there’s nothing different in that regard.

Windows 7 x64 ENG 4 GB RAM Intel i7 860

I was using the v0.2.10 build by laszlo before yours.

davidonpda, were you also running laszlo’s build previously?

Check if the “%appdata%” directory exists, and “%appdata%\bitcoin”

Try: rename “%appdata%\bitcoin” bitcoin2

does it work then?

Check if the “%appdata%” directory exists, and “%appdata%\bitcoin”

Both are existing 😊

Try: rename “%appdata%\bitcoin” bitcoin2

does it work then?

Yes it works.

so I closed it, copied the walled.dat from the old folder to the new one, and now it’s downloading blocks Address book and old transfers seem ok, but there aren’t anyone of old “generated coins” … I just need to wait? Anyway, I can just go back with the old v0.2.10 😊

EDIT: I did another thing. Closed it, copied addr.dat / blk0001.dat / blkindex.dat from old folder to the new one. Restarted bitcoin ( v0.30 ), and now it seems that everything is working. ( I can see also old generated coins now ) I just did NOT copied “log.0000000002” from the database folder …

You figured it out faster than I could post a reply.  

It looks like laszlo’s build of Berkeley DB has database/log.* files that are not compatible with ours.  The .dat files are fine, their format shouldn’t ever change.  All data is stored in the .dat files.  All your own data is stored in wallet.dat.  If you had waited for it to redownload the block chain, your missing transactions and generateds would have appeared as the block chain reached the point where those transactions were recorded.

When you copied the directory except log.0000000002, that’s the best solution.  You should be good now.

The database/log.* files only contain temporary database data.  If you exited bitcoin normally the last time, not exited by forced terminating it or crashing, then the database/log.* files can normally be deleted safely.  They’re only used so that if the database is in the middle of a transaction when the computer crashes or the program is killed or crashes, then it could recover without losing data.

Please keep running v0.3 if at all possible, don’t go back to v0.2.10.

Anyone else who hits this problem, move the database\log.000000000* files somewhere else.  (if it works fine after that, you can delete them later)

I’m reluctant to make the installer delete or move those files.  If the previous run was stopped by crashing or killed, that would be the wrong thing to do.

yes, I’m just using 0.30 by now. Thank you! 😁

Runs fine under WINE. rhymes

It automatically switched the language to German, too. Now that I can see the translation in the client itself, I noticed a few things to improve, and will post a new .po file within the next two or so days.

Yeah, 0.3.0 seems to have a performance increase over svn r84 with Laszlo’s performance patch.

Laszlo figured out that enabling some more optimisation increased performance about 20%, so 0.3 hashes 20% faster than 0.2.0, but I assume he used that in his own build.

30khash increase to what total rate?  (to figure the % increase)

Much faster than Laszlo’s build for me. Went from 600-700khash/s to 1000-1100khash/s on my Intel Core 2 Duo E8500. From 700-800khash/s on a laptop i7 to ~1100khash/s.

edit: Keeping the “Run Bitcoin” option checked in the installer seems to run it with admin privileges on the first launch. (in Win7)

Here’s RC1 for linux for testing: (link removed, see below)

It contains both 32-bit and 64-bit binaries.

Recent changes:

build-unix.txt:

• Added instructions for building wxBase, which is needed to compile bitcoind.
• The package libboost-dev doesn’t install anything anymore, you need to get libboost-all-dev.
• Updated version numbers.

makefile.unix:

• The libboost libraries have removed the “-mt” from their filenames in 1.40.  If you’re compiling with Boost 1.38 or lower, like on Ubuntu Karmic, you would need to change it back to boost_system-mt and boost_filesystem-mt.

Nice. :-)

64-bit version works fine on Ubuntu 10.04, of course it’s (much) faster than through WINE emulation (and because it’s 64-bit!?)

4 cores: 2850 khash/s 3 cores: 2130 khash/s 2 cores: 1420 khash/s 1 core: 700 khash/s

WINE (32-bit):

4 cores - 2300 khash/s 3 cores - 1740 khash/s 2 cores - 1150 khash/s 1 core - 580 khash/s

Thank you - looks pretty nice, too.

http://i50.tinypic.com/2ih1h0p.jpg

edit: What’s the difference between “Sent/Received” and “All transactions”?

will it change something if you release a x64 bit version for Windows?

Ubuntu 9.04 x86:

vlad@vlad:~/bitcoin/bin/32$ ./bitcoind ./bitcoind: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.11’ not found (required by ./bitcoind)

Anybody know what Bitcoin needs?

I don’t know.  Maybe someone with more Linux experience knows how to install the library it needs.

I built it on Ubuntu 10.04.  I hope that wasn’t a mistake.  Maybe it should have been built on an older version for more backward compatibility.  Is this a problem on Linux, that if you build on the latest version, then it has trouble working on older versions?  Is there any way I can downgrade to an older version of GCC on 10.04?

The 64-bit version shouldn’t be any faster than the 32-bit version, but it would be great if someone could do a side-by-side comparison of the two linux versions and check.  SHA-256 is a 32-bit algorithm and nothing in BitcoinMiner uses 64-bit at all.

We don’t need to bother with a 64-bit version for Windows.  32-bit programs work on all versions of Windows.  It’s not like Linux where the 64-bit OS wants 64-bit programs.

I’m also curious if it’s a little faster on linux than windows.

Do you think I should make the directories:
/bin32/
/bin64/
instead of
/bin/32/
/bin/64/

Windows 7 x64 4 GB RAM Intel i7 860

4 cores ( 8 virtuals ): 2200 khash/s

It’s lower than Ubuntu :|

Linux on an overclocked Pentium D:

• 1 core: 565 khash/s, 1.01 kW h/day
• 2 cores: 1100 khash/s, 1.78 kW h/day

The new version seems to give me an improvement of 20-30 khash/s (with two cores) over SVN 80 with laszlo’s patch.

Does anyone know what I have to change in the makefile so that I don’t have to add LD_LIBRARY_PATH pointing to the dependency libraries when executing BitCoin? I already have -I and -L pointing to the single, correct location. (This isn’t caused by the new version; I’ve always had this problem.)

The 64-bit version shouldn’t be any faster than the 32-bit version, but it would be great if someone could do a side-by-side comparison of the two linux versions and check. SHA-256 is a 32-bit algorithm and nothing in BitcoinMiner uses 64-bit at all.

But look here:

32-bit Linux version on Ubuntu 10.04

4 cores: 2500 khash/s 3 cores: 1900 khash/s 2 cores: 1260 khash/s 1 core: 630 khash/s

64-bit Linux version on Ubuntu 10.04 (new measure)

4 cores: 2880 khash/s 3 cores: 2150 khash/s 2 cores: 1450 khash/s 1 core: 720 khash/s

(Though I never created one coin, yet - but I don’t let bitcoin run on 4 cores the whole day, not even on 1 core…)

@Joozero - The Intel i7 860 is @ 2.8 Ghz, isn’t it? My Phenom II is @ 3 Ghz, that’s another important fact I think. I will try bitcoin on Windows 7 at the same machine later.

/edit

32-bit Win version on Windows 7 64-bit

4 cores: 2310 khash/s 3 cores: 1740 khash/s 2 cores: 1160 khash/s 1 core: 580 khash/s

Thanks virtualcoin, that’s a perfect comparison.

The 8% speedup from 32-bit Windows (2310k) to 32-bit Linux (2500k) is probably from the newer version of GCC on Linux (4.4.3 vs 3.4.5).

The 15% speedup from 32-bit to 64-bit Linux is more of a mystery.  The code is completely 32-bit.

Hmm, I think the 8 extra registers added by x86-64 must be what’s helping.  That would make a significant difference to SHA if it could hold most of the 16 state variables in registers.

Lets try using Laszlo’s irc.lfnet.org instead of freenode. Here’s RC2, that’s the only change in it:

(see below for download links)

It looks good! The number of hashes per second intermittently disappears for a few seconds at a time. I think it might be triggered by clicking on the file menu multiple times. I’m using the Linux 64-bit build.

The first panel of the status bar is shared with the help description of menu items as you hover over them.  Since all our menu item descriptions are blank, it replaces it with blank when you’re hovering in a menu.

Changed the version number to 1.3 and removed “Beta”.

(links removed, see below)

Uses irc.lfnet.org.

I’m not sure why but I noticed that as well - my Win32 build was a lot slower than the linux/mac builds I did. I used MinGW and all that but maybe I made a mistake somewhere.. I probably used a different version of Berkeley DB than Satoshi too so that’s why the logs weren’t binary compatible.

MinGW still only has good old stable 3.4.5.  There’s not much reason for them to update it.

When I looked at the 3.4.5 compiled SHA disassembly, I couldn’t see any room for improvement at all.  I can’t imagine how 8% more could be squeezed out of it.  Is it possible Windows could have 8% more overhead?  Not making system calls or anything, just plain busy computational code, could task switching and other housekeeping operations take away that much?

MinGW still only has good old stable 3.4.5. There’s not much reason for them to update it.

When I looked at the 3.4.5 compiled SHA disassembly, I couldn’t see any room for improvement at all. I can’t imagine how 8% more could be squeezed out of it. Is it possible Windows could have 8% more overhead? Not making system calls or anything, just plain busy computational code, could task switching and other housekeeping operations take away that much?

Maybe best to look at the 4.4.3 compiled disassembly as well and see if there are any differences.

On a related note, is the thing compilable by Visual C++? I’m inclined to give it a try when I get around to it.

Dimitri

On a related note, is the thing compilable by Visual C++? I’m inclined to give it a try when I get around to it.

It is, but generating is more than twice as slow.

Mac OS version - requires Intel processor and 10.5 (10.4 not supported)

http://heliacal.net/~solar/bitcoin/builds/MacOSX-Intel-0.3/bitcoin-0.3.0.zip

Laszlo’s build is going to be our first Mac release so please test it!

I’m running rc4 on xp32/64 and everything seems ok so far, installed without problems, ~50connections on a forwarded node, 8 on others, limited to 1(of2) and 1-2(of3) cores, which scales up nicely, but hasnt generated any coins yet. Hopefully i’ll get some tonight. 😎

0.3 released topic 238

Downloaded 0.3 for OSX, have to report it’s not working very well, the hard disk goes crazy (so much so you can’t really open any other apps, unless you want to wait 5 minutes) and it downloads blocks extremely slowly, took me about 4hrs to download 20k before I gave up. The windows one on similar hardware works 10x faster and I had all 66k done in 15-20mins I think it was.

On intel iMac 10.6.4 i5 4gb ram. Oh and it quite often crashes when you quit, is it just me having these problems?

Have tried wiping the database and reinstalling the app with no change.

It sounds like the slow block downloading is a problem for some people but not others, regardless of the platform.. I will try to look into it more, thanks for the report.

Laszlo’s build is going to be our first Mac release so please test it!

I wish I could 😁

It’s an Intel Arch release only, doesn’t support PPC yet/will?